Pressure | Temperature | Data Acquisition | Connectors, Tubing and Accessories
Scanivalve manufactures intelligent pressure and temperature scanner systems designed specifically for wind tunnels and engine test cells. Scanivalve focuses on modular design and small form factor scanners.
Pressure
Intelligent Scanners Click Here for datasheet |
Scanivalve Digital Sensor Arrays are compact, Standalone modules for gas or liquid pressure measurement. Data can be timestamped and is transmitted in user-selectable engineering units via Ethernet TCP/IP protocols.
Click Here for more information
|
||||||||||||||||||||||||||||||
Miniature Scanners Click Here for datasheet |
Scanivalve Miniature ZOC modules are high frequency analogue pressure scanners designed to be installed inside scale models for wind tunnel research. Scanivalve ZOC modules interface to DSM or E-RAD service modules to form a complete pressure and temperature measurement system. Alternatively, these modules can be ordered with 0-2.5V or 0-5V DC outputs to work with customers’ in-house data acquisition systems.
Click Here for more information
|
||||||||||||||||||||||||||||||
19″ Rack Mount Click Here for datasheet |
Each DSA rack-mount enclosure accepts up to 8 DSA3016 pressure scanning modules. Each module is hot-swappable, requiring no system shutdown to change pressure ranges and incorporates 16 temperature-compensated pressure sensors for a total of 128 pressure channels. Scan rate is 625 samples per channel per second. The advantages of this system are the temperature compensation, its low data latency, and quick startup times. Communications interfaces are Ethernet or Serial RS-232. |
||||||||||||||||||||||||||||||
Pressure Calibration Click Here for datasheet |
The Scanivalve SPC4000 is a custom pressure calibrator based upon the highly successful Mensor CPC 6000 automated pressure calibrator. The SPC4000 allows fully automated multi-point and zero-offset calibrations of ZOC and DSA pressure scanners and has special programmed functions and incorporates a Scanivalve Pneumatic Logic Unit controller. This unit has all the ease-of-use and advantageous features of the Mensor CPC 6000 with the added benefit of a custom implementation specifically designed for Scanivalve modules. |
Temperature
| 16-Channel |
Scanivalve DTS3250 Digital Thermocouple Scanners accept either 16, 32, or 64 of type E, J, K, N, R, S, T, or B. They all come with 50-60 Hz noise rejection and 1000 VDC input isolation to ensure reliable data. Scan rate for these units is 640 Hz (meaning 40 samples per channel per second for the 16 channel unit) and output is via Ethernet protocol. Maximum accuracy is ±0.25°C depending on thermocouple type. |
| 32-Channel | Click Here for more information |
| 64-Channel | |
| Uniform Temperature Reference |
The UTR-P (Uniform Temperature Reference) module accepts 16 pairs of thermocouple wires, and incorporates an isothermal block as the reference temperature. These compact self contained rugged modules serve as cold junctions for the standard thermocouple types E, J, K, S, R, T, & N. Specifications: |
Data Acquisition
DSM4000 Click Here for datasheet |
The Scanivalve Digital Service Module, the DSM4000 is the latest addition to our lineup of pressure scanning equipment. This is the first Scanivalve A/D module to support the ARINC429 protocol making compact Scanivalve equipment suitable for flight test instrumentation.
The DSM4000 offers several advantages over the previous model, notably: Specifications: |
E-RAD4000 Click Here for datasheet |
The Scanivalve ERAD4000 is a compact, modular A/D module designed for the Scanivalve ZOC scanner system. The E-RAD is generally placed directly inside a wind tunnel model, close to the ZOC scanners and allows a single Ethernet cable output from the model instead of messy multi-cable umbilicals. The E-RAD utilizes a modular A/D system which allows between 1 and 8 A/D modules to be installed in a single RAD base, reducing overall system cost for smaller systems and making maintenance of larger systems much faster, easier, and less costly. Specifications: |
| ZOCEIM |
The Scanivalve ZOCEIM is a 16- or 32-channel Electrical Input Module based upon the ZOC scanner amplification and transmission unit. Specificaitons: |
| DSA16EIM |
This DSA rack-mount module scans 16 channels of ± 20 mV to 5V DC inputs at 625 samples per channel per second. This module is excellent for signal conditioned thermocouples, RTDs, strain gauges, or individual transducers used in conjunction with a Scanivalve pressure scanning system. Additional circuits can be installed in the factory to provide excitation to the customer’s specification for connected equipment. |
Connectors, Tubing and Accessories
Tubing Click Here for more info |
Scanivalve offers a wide range of tubing in different materials and wall thicknesses to meet their customer’s needs for different applications. |
Connectors Click Here for more info |
An extremely wide range of connectors, converters, junctions, and keyed multi-tube quick-disconnects are available from Scanivalve. |
Tools Click Here for more info |
A suite of specialized tools for working with miniature tubulations is available from Scanivalve. |
