Mensor

CPC 6000
Click Here for datasheet

The Mensor CPC 6000 is a modular, dual-channel controller with up to four internal transducers.
An integrated pump provides ±10 psig for calibration without a pressure source.
The CPC 6000 transducers can be easily removed from the front of the unit and exchanged for a different pressure range or sent individually for calibration.

Transducer ranges from 0-10 in. H₂O to 0-1500 psi are available for the CPC 6000 in gauge, bi-directional, or absolute models. Barometric reference can also be included for absolute or gauge emulation.
Pressure can be displayed in any number of engineering or user-defined units. Accuracy is 0.01% IS-50 (see IS-50 definition below).
This unit can be controlled via RS-232, Ethernet, or IEEE-488.

Click here to learn more about Mensor Controllers

CPC 8000

Click Here for datasheet

The Mensor CPC 8000 is a high accuracy, high pressure controller with up to two internal transducers. Barometric reference can also be included.Transducers for the CPC 8000 are available in pressure ranges from 0-2 psi to 0-23,000 psi absolute, gauge, or bi-directional.

Pressure can be displayed in any number of engineering or user-defined units and barometric reference can be included for absolute or gauge emulation.
Accuracy is 0.008% FS or 0.01% IS-50 (see IS-50 definition below).
This unit can be controlled via RS-232 or IEEE-488.

Click here to learn more about Mensor Controllers

The Mensor CPC 3000 is a high speed pressure controller with a single internal transducer and is designed to meet the needs of high-volume and industrial clients.

Transducers for the CPC 3000 are available in pressure ranges from 0-5 psi to 0-1000 psi absolute, gauge, or bi-directional.
Pressure can be displayed in any number of engineering or user-defined units.
Barometric reference can also be included and accuracy is 0.025% FS.
This unit can be controlled via USB, Ethernet, or IEEE-488.

Click here to learn more about Mensor Controllers

The Mensor CPG 2500 is a precision transfer standard for calibration labs and instrument manufacturers.
Its dual-channel two transducer plus barometer configuration makes it an excellent instrument for most applications.
A rack-mount option and simple touch-screen operation increase its flexibility.

Using the same transducer technology available for the CPC 6000, this unit is available with 0.01% IS-50 accuracy (see IS-50 definition  below).

Available pressure ranges are 0-10 in. H₂O to 0-10,000 psi gauge, absolute or bi-directional.
Differential, Barometric and Avionics models are available.
This unit can be controlled via RS-232 or Ethernet. IEEE-488 or analogue outputs are optional.

Click Here to learn more about Mensor Indicators

The Mensor DPG 2300 is a rugged handheld calibrator used by field technicians in the process and utilities industries for process transducer calibration.
The internal rechargeable battery and optional 4 to 20 mA control loop with 24V DC supply allows simplifies field calibration by reducing the number of components and time required.

Its dual-transducer configuration, min/max options and stainless steel media-isolated sensors accurate to 0.015% FS make it one of the most flexible and accurate handheld calibrators on the market today.
Available pressure ranges are 0-10 in. H₂O to 0-6000 psi gauge, absolute, or bi-directional.
This unit comes with an RS-232 output as standard.

Click Here to learn more about Mensor Handheld Indicators

The Mensor DPG 2400 is an economical bench-top digital pressure indicator.
Its small form factor and rack-mount option make it an excellent precision barometer, pressure monitor or high-accuracy alternative to a test gauge.

Accuracy is 0.03% FS and available pressure ranges are 0-10 in. H₂O to 0-10,000 psi, gauge, absolute, or bi-directional.
Optional RS-232 or RS-485 outputs are available.

Click Here to learn more about Mensor Indicators

The Mensor CPT 6100 and CPT 6180 intelligent pressure transmitters bring the high-accuracy CPC 6000 transducers to an inexpensive, compact form factor for OEM and research use.
These high response rate (250 Hz) transducers are used in wind tunnels and test stands as well as process automation and calibration device manufacturing.

Accuracy is 0.01% FS or IS-50 (see IS-50 definition below).
Pressure ranges are 0-10 in. H2O to 0-6000 psi absolute, gauge, or bi-directional.
Output is RS-232 or RS-485 and special barometer units are available.

Click Here to learn more about Mensor Transducers

The Mensor CPT 6000 intelligent pressure transmitter is a compact, low-cost, high-accuracy transducer for OEM and special applications.
With a 50 Hz sampling frequency and fully compensated digital output it is excellent for process applications requiring high accuracy or research applications requiring a small form factor.

Accuracy is 0.02% FS.
Pressure ranges are 0-10 in. H2O to 0-6000 psi absolute, gauge, or bi-directional.
Output is RS-232 or RS-485.

Click Here to learn more about Mensor Transducers

The Mensor CPB 3000 is a compact industrial hydraulic deadweight tester suitable for calibration labs or on-site applications.

Total Uncertainty 0.025% of reading
Available pressure ranges from 3 psig to 14,500 psig
5-year recalibration cycle traceable to NIST

Please contact us for details

Mensor CPB 5000 industrial deadweight tester features a patented tool-less quick change piston-cylinder system.

Total Uncertainty 0.015% or optional 0.008% of reading
Hydraulic ranges from 3 psig to 14,500 psig
Pneumatic ranges from -14 psig (with vacuum adapter) to 1500 psig
5-year recalibration cycle traceable to NIST

Please contact us for details

Mensor CPB 5000-HP High Pressure industrial hydraulic deadweight tester with patented Quick-change Piston-Cylinder System.

Total Uncertainty 0.025% or optional 0.020% of reading
Available ranges from 350 psig to 70,000 psig
5-year recalibration cycle traceable to NIST

Please contact us for details

Improves measurement accuracy of deadweight testers by compensating for the effects of Temperature, Humidity, Local Gravity, etc.

Options include Piston Float Indicator and integrated voltage supply with Multimeter function for pressure transducer calibration.
Easy push-button conversion of mass loads to pressure units and vice-versa.
No PC required.

Please contact us for details

CPA 2501Click Here for datasheet

The Mensor CPA 2501 is a CPG 2500  designed and programmed for manufacture, calibration and repair of Avionics and Aerospace equipment. This device is ideal for instrument manufacturers, avionics calibration labs, and wind tunnel applications.

Readouts include:
Barometric Pressure
Altitude
Airspeed

Click here to learn more about Mensor Avionics Equipment

Click the graph to enlarge

0.01% IS-50 Accuracy means from 50% to 100% of the pressure range of a transducer, accuracy is 0.01% of Reading.
Below 50% of the pressure range, transducer accuracy is 0.005% of Full Scale.